MESSAGE
CONTACT
E-mail:ws9309@gmail.com
Tel:0086-371-63712098
Mobile:0086-15333827088
Add:dongming Road,ZHENGZHOU,CHINA,450000
heavy hammer crusher, heavy hammer crusher model,heavy hammer crusher manufacturer, heavy hammer crusher price,heavy hammer crushers,Chinese crusher

Heavy Hammer Crusher

 

 Brief introduction:
Heavy Hammer Crusher is applied to medium-hardness stone with hardness lower than 100 Mpa, such as limestone, malm, sandstone, shale, gypsum, coal and so on. With its huge inlet size and adjustable outlet size, heavy hammer crusher becomes one of the most popular crusher in the market.

Characteristics:
Heavy Hammer Crusher set stone crushing and shape as a whole, with big feeding granularity and small outgoing granularity. Changing three-level crushing to first-level crushing, rotor speed is high, the hammer with great weight and durable service. It has advantages of large reduction ratio, great production, particles shapeliness, simple structure, easy maintenance, etc. 
Adopt new design idea. Comparing with the same type produces, it has larger production and higher qualified rate, shapeliness particles, lower energy consumption. 
Enable to crush wet or dry tow forms material, can handle higher water content materials, not blocking materials. 
The replacement of wearing parts is very convenient, and the maintenance cost is low; 
This equipment can replace the primary, secondary crushing of traditional jaw crusher and impact crusher, thus reduce the equipment investment.

Operating principles:
Rotor disk, driven under the motor, drive the hammerhead to do high-speed circular motion. Materials are carried into machine from the upper feeding inlet, crushing by the strike, impact, bump, and grind of the high-speed running hammerhead. After crushing, those materials with larger granularity than requirement hit the counterattack board for re-crush along the hammer tangent direction with the new materials, so that the coarse, medium and fine crushing all in one station, finally materials meeting requirement exclude from material outlet.

Technical parameter:

Specification

Rotor(mm) diameter*length

The size of charge(mm)

The size of discharge(mm)

Capability(t/h)

Motor power(KW)

0806

800×600

≤300-400

0-40

60

55

0808

800×800

≤400-500

0-50

80-100

75

1008

1000×800

≤500-650

0-60

100-120

90

1010

1000×1000

≤600-750

0-70

120-150

132

1210

1200×1000

≤650-800

0-70

150-200

185

1510

1500×1000

≤800

0-80

160-250

200

1512

1500×1200

≤800

0-80

250-300

250

1615

1600×1500

≤900

0-80

300-380

280

2015

2000×1500

≤1200

0-80

400-500

400