Our Location | Contact Us
about

Your position :home-CrushingHeavy Hammer Crusher

  • Overview
  • Features
  • Technical parameters
  • Application
  • Rotor disk, driven under the motor, drive the hammerhead to do high-speed circular motion. Materials are carried into machine from the upper feeding inlet, crushing by the strike, impact, bump, and grind of the high-speed running hammerhead. After crushing, those materials with larger granularity than requirement hit the counterattack board for re-crush along the hammer tangent direction with the new materials, so that the coarse, medium and fine crushing all in one station, finally materials meeting requirement exclude from material outlet.
  •  PCF series Heavy Hammer Crusher set stone crushing and shape as a whole, with big feeding granularity and small outgoing granularity. Changing three-level crushing to first-level crushing, rotor speed is high, the hammer with great weight and durable service.  It has advantages of large reduction ratio, great production, particles shapeliness, simple structure, easy maintenance, etc.
    Adopt new design idea. Comparing with the same type produces, it has larger production and higher qualified rate, shapeliness particles, lower energy consumption.
    Enable to crush wet or dry tow forms material, can handle higher water content materials, not blocking materials.
    The replacement of wearing parts is very convenient, and the maintenance cost is low;
    This equipment can replace the primary, secondary crushing of traditional jaw crusher and impact crusher, thus reduce the equipment investment.
  •  

    Specification

    Rotor(mm) diameter*length

    Charge size(mm)

    Discharge size(mm)

    Capability(t/h)

    Motor power(KW)

     PCF 0806

    800×600

    ≤300-400

    0-40

    60

    55

     PCF 0808

    800×800

    ≤400-500

    0-50

    80-100

    75

     PCF 1008

    1000×800

    ≤500-650

    0-60

    100-120

    90

     PCF 1010

    1000×1000

    ≤600-750

    0-70

    120-150

    132

     PCF 1210

    1200×1000

    ≤650-800

    0-70

    150-200

    185

     PCF 1510

    1500×1000

    ≤800

    0-80

    160-250

    200

     PCF 1512

    1500×1200

    ≤800

    0-80

    250-300

    250

     PCF 1615

    1600×1500

    ≤900

    0-80

    300-380

    280

     PCF 2015

    2000×1500

    ≤1200

    0-80

    400-500

    400

  • PCF series Heavy Hammer Crusher is applied to medium-hardness stone with hardness lower than 100 Mpa, such as limestone, malm, sandstone, shale, gypsum, coal and so on.

Product center

Crushing

Grinding

Dressing

Sieving

Home | Ord Page | XmlChina Henan Heavy Industrial Factory Add:NO.239 road nanyang, Zhengzhou, China
Postcode:450001 T E L : +86-371-63712098